Racks
-
Steering Rack Rhd New Unit
- R2,669.99 excl VAT
- Brand new steering rack less track rod joint ends for Mk2 models 1967 on, with right hand drive steering. Always replace the dust shield sponge 21A30 between the body and rack where the spindle that locates the inner column sits.Also ensure the anti friction/static packing pieces 21A2553 are fitted.
-
Longer Competition Track Rod End
- R283.86 excl VAT
- Longer track rod end for running with negative camber, gives an extra 5mm of adjustment approximately over the standard item. Has consistent thread pattern and perfect design to our requirements to fits all known racks and classed as a competition track rod end. Sold singly.
-
Steering Rack Gaiter Kit (Pair) 4.5″ Long
- R194.00 excl VAT
- Non genuine gaiter kit with plastic clips for your steering rack is our best seller but see 17H6298 for single gaiter.
-
Steering Rack Anti Friction Strip
- R23.89 excl VAT
- Called an anti friction strip this plain looking (plastic) piece of strip is used on all mini steering racks between the U bolt and the rack probably because the U bolt is hard steel and the rack is softer rough cast alloy. See 2A6208 for U bolts. Sold singly 2 required per rack.
-
Steering Rack to Body Seal
- R18.54 excl VAT
- The sponge dust shield that fits over the splined area of the steering rack as it bolts up against the bulk head. Usually it is sold with the centre part cut but not pushed out, but it pops out easily and is shown on our picture as a reference only. The centre part is discarded.
-
Rack Gaiter Set Most
- R275.56 excl VAT
- This gaiter kit with plastic clips fits many Genuine Rover Racks plus many Quinton Hazel. Also fitted the first generation of Quick Racks where the gaiters are different diameter bore sizes- approx 42.4mm and 26.7mm -
-
Steering Rack 2.2 Turn Quickrack Rhd Brand New
- R3,592.84 excl VAT
- Quickracks-If you are interested in performance driving then you know reaction time from the driver to the car is critical; the time it takes to turn the steering wheel to the desired angle is important! The standard rack is 2.7 turns lock to lock, our quick ratio is 2.2 turns! Always replace the dust shield 21A30 between body and rack…
