Performance
-
Clutch Plate Road/Rally Performance 180 mm
- Mini Spares Performance clutch plate. Great upgrade for increased performance engines,tested to 10,000rpm and to destruction for evaluation. For diaphragm type clutch, pre verto. Great clutch plate and a better priced alternative to C-AHT596
-
MED Race Paddle clutch plate
- MED's exclusive six-segment paddle clutch plate is designed to cope with the strains of full competition, race or rally. The segments are narrower than other paddle types available, which in effect lightens the clutch plate, while maintaining the same levels of friction thanks to a bronze cerametallic face material. The centre boss is machined from EN24T steel, with a spring steel mounting…
-
MED HD CLUTCH ARM
- R2,559.50 excl VAT
- The MED heavy-duty clutch arm is machined from EN24T steel, which is then heat treated for added strength and longevity. The design swaps the standard ball end for a full-width cam section, with a special plunger to suit. This is far stronger than the standard setup, which is prone to premature wear of the ball. With uprated competition clutch setups,…
-
Clutch Kit Turbo Ap With 180 mm Plate
- 3 piece Verto Clutch kit for Turbo with 180mm plate which can be used on any Verto flywheel including injected cars. Approximately 20% upgrade over standard this is ideal for any tuning mods to any Verto flywheel but cars from 1990 were fitted with a larger 190mm clutch plate. The pressure plate used in this kit is our C-AEG485. Clutch…
-
Clutch Diaphragm Grey Competition Type
- This clutch spring is intended for the serious racers. Sometimes referred to as a 19lb spring in contrast to the "Orange" diaphragms 17lb, this diaphragm is the one of choice for use with a sintered clutch disc but could also be very helpful in racing with a stock or rally clutch disc.
-
Clutch Plate 4 Finger Race Paddle 190 mm for 1990 On Verto
- Performance type Verto 190mm wide paddle type drive plate as used for racing. This will not fit pre Verto backplate/flywheel as it is to wide.
-
Clutch Plate 4 Blade Paddle Plate 180 mm
- Performance type Verto 180mm wide paddle type drive plate as used for racing. Alternative to AP Racing plate
-
Ap Sintered Clutch Plate Heavy Duty Race
- AP Racing 4 finger type race plate which is also what AP have decided to use to replace their old style 6 sintered pad type. See our our 5 finger type‚ C-AHT597. This is AP Racings only sintered plate which was used for heavy duty racing but very expensive ---so see our own offerings which have all proved reliable. C-AHT597…
-
Clutch Plate Minispares 5 Finger Sintered Paddle Plate
- This is our own sintered plate,which has been tried and tested in race and rally cars since 2003 without failure. Has 5 seperate paddle plates 20 Thou thicker than AP equivalent. The 5 fingers is the current format used for better heat dispersion.
-
Clutch Plate Road/Rally 180 mm Made By Ap Racing
- High performance plate- from the old AP Racing division. Bonded rally/race type 180mm wide clutch plate which is ideal for fast road and track days. This was the most commonly used performance plate from the AP Racing section and originally claimed good for 140ft lbs, but see the new Mini Spares/AP clutch plate C-AHT595 tested to 10,000rpm and destruction by…
-
Clutch Plate Verto Performance Plate 190 mm Wide
- Performance clutch plate for road and rally Verto type - see also 20% upgraded pressure plate
-
Pressure Plate Lightened En8 for Competition Pre Verto
- Pre Verto type clutch. This is a lightweight version of the pressure plate for diaphragm clutches and made in an upgraded material EN8 steel for competition use. Also in EN8 is 22A598 which should be used for road use as a replacement for the original 22G270 or 22A598 cast backplates, nearly 2lbs heavier. This C-AHT230 weighs 1.291(2.846lb) or 1.32kg (2.91lb).
-
Verto Performance Clutch Cover
- Verto 20% upgraded performance pressure plate which should be used with 190mm organic clutch plate‚ C-AHT594‚ or the paddle type drive plate as used in racing‚ C-AHT600. This pressure plate has a blue paint identifying mark and can be used on any Verto clutch MPI /SPI including Turbos as it offers an upgrade but check flywheel for wear if changing…
-
Clutch Flywheel Bolt. Short Race Use – Sold Singly
- Race quality bolt-sold seperately- these shorter bolts hold the spring straps‚ 2A3658‚ to the flywheel on diaphragm type flywheels only. Not for Verto flywheel. Only tighten up to 16lbs per sq foot torque when using shake proof washer or 18lbs if using flat washer and locktite ---
-
Clutch Bolt Long Cover To Pressure. Race Use Single Bolt
- Race quality shoulder bolts for the Mini clutch backplate to the diaphragm--sold seperately- heavy duty racing type EN16 tightenn up to 16lbs per sq foot torque when using shake proof washer or 18lbs and locktite. Use with‚ C-2A3659‚ race quality bolts
