Heating
Oil Pressure Switch Mini and Metro
- R217.04 excl VAT
- Fits every A series engine from 1959-1996 (except twin point injection minis) they have a different switch GPS135 and also have a transducer for oil temperature (YCB100320). These original type oil switches came on when oil pressure dropped below 7-10lbs but if you require earlier warning than that then use HPS1 which activates at about 22lb or HPS3 which is…
Radiator Cap, Lev – R – Vent, Steel 16 psi
- R276.60 excl VAT
- This radiator cap is designed to prevent your car from boiling over at a lower temperature. It has a pressure release lever to allow the pressure to escape, and it is made from premium materials to meet the original equipment specifications. more details Key Features - The SWIV-EL design allows the cap to be installed and removed much easier than…
Radiator 2-Core Aluminium (Any Side Fitting Type)
- R3,846.80 excl VAT
- Mini Spares own exclusive designed Lightweight aluminium type high efficiency radiator with good fitment, rigidity and appearance, unlike others on the market with 4 large ugly fixing nuts on each side, or where the header tank is 10mm wider that fouls the cowlings. The lower hose outlet is also positioned correctly to fit all the Coopers and 1275 engines and…
Heater Valve Genuine Minispares Original Shape
- R439.48 excl VAT
- Genuine Mini Spares heater valve. The original RANCO tooling has been scrappped so beware of some imports available where the inners quickly explode loosing the metal cap and all your water when operated.This has M4 metric thread bolt included for the cable screw instead of the 11/31"unc thread original For the straight stem version of this valve see 13H5506. For…
Heater Tap Gasket
- R16.41 excl VAT
- This gasket fits on the cylinder head for every A series heater valve or outlet pipe until the hole was no longer drilled when they changed to a heater valve fitted into the hose line from 1990 on.
Cylinder Head Heater Take Off
- R225.45 excl VAT
- Once the old type alloy heater valve on the head was discontinued in 1990 for the plastic free floating inline type this take off union was fitted in its place on A series engine cars for use with the larger 5/8" hose. Uses‚ 88G221‚ gasket.
11 Blade Plastic Fan – White
- R631.56 excl VAT
- Genuine specification 11 blade plastic fan is very efficient at cooling the radiator and reduces cabin noise than the fans with less blades. Standard fitment to all Minis. Finished in semi opaque white plastic.
Accelerator Cable Nylon Sleeved Extra Long
- R212.15 excl VAT
- Our heavy duty throttle cable is superior in many ways. A nylon interior ensures smooth operation. The outer cable is 32mm longer and inner is 95mm longer than the standard one. Cable to carb bolt is ACC5062.
Heater Tap Stud
- R19.76 excl VAT
- Heater valve studs fitted to the cylinder head. 1/4"unf 1.1250" long.
MED ALLOY WATER PUMP PULLEY (4.220″)
- R1,486.84 excl VAT
- Two larger pulley sizes (4.220" and 4.720") are available, designed to slow the water moving through the radiator to allow it time to cool - an important factor on any high-RPM race engine. For reference, the original stock pulley measured 3.875". Please note: On installation you must first check for clearance between the pulley and cylinder head, especially where the…
Heater Valve Twin Point Only Fitted On Side Of Heater Unit
- R450.90 excl VAT
- Twin point Mini heater tap that fits to the heater assembly
Heater Valve In Line Type From 1989 to 1996
- R514.72 excl VAT
- From 1989 until the introduction of the twin point injection cars, Rover fitted this in line floating heater valve which was the first time they never bolted the heater valve as a direct outlet on the cylinder head. A strange looking black plastic valve to control the water to the heater.
Heater Control Cable SPi (42.250″Long)
- R356.24 excl VAT
- The single point injected used this very long cable,10" longer than previous models so if you need an extra long cable this will fit. It's now 42.25". Has the old logo as per CHM373 and a loop on the end to fit later in-line heater valves. Your original logo can be fitted by pushing new one out carefully if you…
Motif for Heater Cable 1990on Red and Blue Arrow Emblem
- R93.15 excl VAT
- first used in 1990 but can be used on earlier cables and it shows HOT and COLD displayed by red and blue arrow heads
