Carburettors
Categories
- Mini
- Accessories
- Badges & Stickers
- Battery
- Body
- Brakes
- Cables
- Clutch
- Cooling & Heating
- Drivetrain
- Electrics
- Engine
- Exhaust & Manifold
- Fasteners
- Filters
- Fuel
- Gauges
- Gearbox
- Grilles & Brightwork
- Interior
- Steering
- Subframe
- Suspension
- Water
- Wheels
- Shop Soiled
Categories
- Mini
- Accessories
- Badges & Stickers
- Battery
- Body
- Brakes
- Cables
- Clutch
- Cooling & Heating
- Drivetrain
- Electrics
- Engine
- Exhaust & Manifold
- Fasteners
- Filters
- Fuel
- Gauges
- Gearbox
- Grilles & Brightwork
- Interior
- Steering
- Subframe
- Suspension
- Water
- Wheels
- Shop Soiled
-
Carb Gasket Su Float Chamber
- R28.89 excl VAT
- Rated 0 out of 5
- Paper gasket for the float bowl of any HS2/HS4/HS6 carbs.
-
Throttle Return Spring for Twin Carbs
- R38.41 excl VAT
- Rated 0 out of 5
- Throttle return springs for all twin carb variants. Usually 3 fitted.
-
Accelerator Return Spring for Hs2/4 Carb
- R57.90 excl VAT
- Rated 0 out of 5
- This throttle return spring fitted every HS2/4 single SU carb and also on the twins as fitted by the factory. Twin carbs used AEC2075 for choke return.
-
Sandwich Plate for Weber DCOE 40mm
- R80.00 excl VAT
- Rated 0 out of 5
- This is used to ensure enough flexibility to prevent high frequency vibrations being transmitted to the fuel in the float chamber, whilst preventing air being drawn in.
-
Sandwich Plate for Weber DCOE 45mm
- R80.00 excl VAT
- Rated 0 out of 5
- This is used to ensure enough flexibility to prevent high frequency vibrations being transmitted to the fuel in the float chamber, whilst preventing air being drawn in.
-
Su Carb Float Top Screw
- R19.76 excl VAT
- Rated 0 out of 5
- The proper slot head screw for the SU dashpot and float lid 3/16 whitworth thread.
-
Stud Hs4/Hif Carb + Some 12g103 Housing (5/16″)
- R36.72 excl VAT
- Rated 0 out of 5
- Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housing. Note that HS2 carbs require larger CHS2613/4 studs, 5/16" unc with unf thread for nut.
-
Carb Jet Hs4 Mini Type Red
- R359.08 excl VAT
- Rated 0 out of 5
- Original type jet with red plastic end for HS4 carbs---If you have the later nylon coated jet see part number LZX1111A.
-
Float Needle Valve Hs2/4/6 (Viton Tipped)
- R267.80 excl VAT
- Rated 0 out of 5
- This is the original type of needle valve that governs the plastic fuel float in your SU carb. An alternative better upgraded version is available as CA90.
-
Carb Hs4 Service Kit Su 1.5″
- R1,716.83 excl VAT
- Rated 0 out of 5
- Carb repair kit less spindle and butterfly for single HS4 carbs-includes float needle valve and jet. Full repair kit with spindle etc is CRK227-----for waxstat type see CRK121, This kit is suitable for pre Waxstat (pre 74) Minis only
-
Full Hs2 Twin Rebuild Kit
- R3,883.80 excl VAT
- Rated 0 out of 5
- Twin 1 1/4" SU carbs were stock on Cooper S and most Spridgets and are popular upgrades on many cars. The reason they are so popular is that the design is fantastic- but let's face it people
-
Carb Dashpot Oil for SU Range
- R265.77 excl VAT
- Rated 0 out of 5
- Correct and original thickness oil for SU carb dashpots.
-
Carburettor Lever Pin
- R66.53 excl VAT
- Rated 0 out of 5
- Pin to hold the accelerator cable which locates in the carb bracket lever. Supplied as originally fitted with washers, nut and split pin plus a proper machined hole for the cable unlike many others on the market- which come either bare or with wrong type washers. See AUE34 also for choke cable trunnion
-
Pipercross Constant Radius Ram Pipes – 40 mm
- R654.08 excl VAT
- Rated 0 out of 5
- Models All 105 series cars fitted with carbs (Weber, Dellorto or Solex carbs) Depth 30mm Fitment Ram Pipes are Bolt-on fitment. Brand Pipercross Note:Â Sold Individually
-
Carb HS4 Full Rebuild Kit Plain Disc
- R2,405.78 excl VAT
- Rated 0 out of 5
- For HS4 single pre waxstat carbs with red jet this is the full rebuild kit with the spindle and plain throttle disc and bushes--- see CRK227 for disc with overrun valve.